• What is the difference between line vty 0 4 & line vty 0 15

    What is the difference between       line vty 0 4 & line vty 0 15. Why is it used in different scenarios ?
    Jose
    last modified by Jose
  • Does 1Gb Ethernet actually go as fast as 1Gb?

    Hello all,   I'm reading up QoS chapter on CCNA ICND2 OCG. It has the following paragraphes and the chart.   This leads me to a very basic question, does 1Gb Ethernet actually go as fast as 1Gb? Because if...
    Learner
    last modified by Learner
  • Why we use "ascii " when we configure # ip dhcp client client-id ascii pc1

    Why we use "ascii " when we configure # ip dhcp client client-id ascii pc1   How is this
    Jose
    created by Jose
  • STP Port cost on trunks vs setting stp port cost on access ports

    Hi , Can someone please explain why setting the stp costs on trunks has an impact on switch's rout cost, whereas setting stp costs on access ports does not.
    lavisha
    last modified by lavisha
  • ICND 1 Practice

    Which address and wildcard mask combination can be represented with the keyword "any"? A. 255.255.255.255 255.255.255.255 B. 0.0.0.0 255.255.255.255 I found this question in an ICND 1 Practice Exam. The answe...
    islem
    last modified by islem
  • SSH port numbers

    i have read that the default port number for SSH is 22. but people can change it and use to whatever they like. how is it possible? how does it work? can someone share useful information?   what could be the po...
    maha.dar10
    last modified by maha.dar10
  • CCNA Recertify

    Hello Cisco Community friends!   My CCNA R&S will expire in November of this year, and i was looking for  the best option to renew my cert. I am going to start my CCNA Cyber Ops Scholarship program in ...
    Alejandro
    last modified by Alejandro
  • Networking Tech "Toolbox"

    This document is to be used as a Networking Technician's toolbox (or cheat sheet). This document will contain informational charts and such, that could be used in the field.     Link Status LED Meaning...
    Zppix
    last modified by Zppix
  • Where can I find a list of slash notations?

    I recently took the ICND1 exam and achieved CCENT and now I'm working on a network engineer "toolbox" and was wondering where I could find a list of slash notations.
    Zppix
    last modified by Zppix
  • More IP Addressing

    Two weeks ago, I posted a video on the basics of how IP addresses work. There was too much for a single video, so here's the rest. I hope it helps with your exam!   This looks at B U M traffic, private addresses,...
    Luke
    last modified by Luke
  • NTP config confusion

    Hi all,   I'm a bit confused as to what Cisco is expecting for NTP in the ICND1.   '4.5 Configure and verify NTP operating in client/server mode'   Am I correct in thinking for this all I need to do ...
    John
    last modified by John
  • SEPARATION OF GUEST USERS FROM INTERNAL WIFI ACCESS

    Hi Guys,   Greetings,   Is there anyone here that can help me to find a tool, an application or any resources that is suited for the separation of guest users from internal wifi access.   You're resp...
    Kathleen
    last modified by Kathleen
  • Learned something new about traceroute

    Hello all,   When doing traceroute on routers or tracert on Windows, how many of you thought it specifically pings each hub and gets replies?   The output below always misleads me to think it specifically ...
    Learner
    last modified by Learner
  • System ID extension in BID for STP

    Hi ,   Why does the 4-bit priority field has to be in the multiple of 4096 under System ID extension for STP?
    lavisha
    last modified by lavisha
  • How IP Addressing Works

    If you're just starting out, you will soon find that IP Addressing is everywhere! If you've been studying for a while, you will realize that it's something that you need to know in depth.   To help you along, her...
    Luke
    last modified by Luke
  • PT Labs.rar

    Some CCent level labs I created in Packet Tracer 7.1 inspired by Wendell Odom's Certskills CCent Blog.  I am also looking for similar level config and troubleshooting labs.
    Morgan
    last modified by Morgan
  • How to get DHCP pool from a remote server

    Hi Everyone,   Please me with my problem, I have configure R1 to be a DHCP server and created several pools for the VLANs (VLAN 1,2,3) except VLAN1 (its not being used).   R1(config-if)#do show running-conf...
    Reymond
    last modified by Reymond
  • IPSec over GRE tunnel. Seeing only one ISAKMP SA

    Hello all,   With Sara's help, I corrected two errors with my IPSec configs. Now IPSec is up and running. With Wireshark, I can see pings between both PCs are encrypted with ESP.   But if I run "show crypt...
    Learner
    last modified by Learner
  • find out nr of subnets?

    How many subnets and how many hosts per subnets can you create from 172.16.0.0 255.255.255.224 ? MY WORKOUT subnet mask .224 means 5 bits for hosts, the remaining ones for subnet portion. nr. subnets = 2^(27-24)...
    Pja
    last modified by Pja
  • Cisco switch not showing CPU/fan/temp sensors in SNMP

    Hi,   I am trying to configure PRTG to monitor some of my SG300 series managed switches but I am only able to discover ping, https etc sensors. I want ot monitor CPU utilization, temperature, fan status etc with...
    Night Fury
    last modified by Night Fury